Polymaker 2.85mm PolyDissolve S1 Filament (750g, Natural)
Polymaker Polydissolve S1 2.85mm Overview
The Polymaker 2.85mm PolyDissolve S1 Filament is a PVA-based water dissolvable support for PLA, TPU, PVB, and nylon based filaments. It was specifically engineered to have an optimal interface with these materials while also displaying good solubility.
It can take between 6 to 12 hours to fully dissolve depending on your setup. You can speed up the process by increasing the water temperature, changing the water regularly, and adding a pump to make the water flow.
- Printing Temperature: 419 - 437Ā°F / 215 - 225Ā°C
- Bed Temperature: 77 - 140Ā°F / 25 - 60Ā°C
- Printing Speed: 30 - 40 mm/s
- Fan: ON
Direct Drive
- Retraction Distance: 1 mm
- Retraction Speed: 20 mm/s
Indirect Drive
- Retraction Distance: 3 mm
- Retraction Speed: 40 mm/s
- 176Ā°F / 80Ā°C for 12 hours (Only if the material has absorbed moisture)
- PolyDissolve S1 is very hygroscopic, please make sure to use a dry box
Items Included
- Polymaker 2.85mm PolyDissolve S1 Filament (750g, Natural)
Additional Resources
No additional resources available
Polymaker Polydissolve S1 2.85mm Specs
| Filament Diameter |
2.85 mm
|
| Filament Material |
PVA
|
| Filament Properties |
Dissolvable
|
| Color |
Natural
|
| Weight |
1.7Ā lb / 750Ā g
|
| Package Weight |
2.225 lb
|
| Box Dimensions (LxWxH) |
9.2 x 8.3 x 2.3"
|
All product and company names are trademarksā¢ or registeredĀ® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Polymaker Polydissolve S1 2.85mm Overview
The Polymaker 2.85mm PolyDissolve S1 Filament is a PVA-based water dissolvable support for PLA, TPU, PVB, and nylon based filaments. It was specifically engineered to have an optimal interface with these materials while also displaying good solubility.
It can take between 6 to 12 hours to fully dissolve depending on your setup. You can speed up the process by increasing the water temperature, changing the water regularly, and adding a pump to make the water flow.
- Printing Temperature: 419 - 437Ā°F / 215 - 225Ā°C
- Bed Temperature: 77 - 140Ā°F / 25 - 60Ā°C
- Printing Speed: 30 - 40 mm/s
- Fan: ON
Direct Drive
- Retraction Distance: 1 mm
- Retraction Speed: 20 mm/s
Indirect Drive
- Retraction Distance: 3 mm
- Retraction Speed: 40 mm/s
- 176Ā°F / 80Ā°C for 12 hours (Only if the material has absorbed moisture)
- PolyDissolve S1 is very hygroscopic, please make sure to use a dry box
Items Included
- Polymaker 2.85mm PolyDissolve S1 Filament (750g, Natural)
Additional Resources
No additional resources available
Polymaker Polydissolve S1 2.85mm Specs
| Filament Diameter |
2.85 mm
|
| Filament Material |
PVA
|
| Filament Properties |
Dissolvable
|
| Color |
Natural
|
| Weight |
1.7Ā lb / 750Ā g
|
| Package Weight |
2.225 lb
|
| Box Dimensions (LxWxH) |
9.2 x 8.3 x 2.3"
|
All product and company names are trademarksā¢ or registeredĀ® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
